Home > Products > Turbine pumps
MDT Series
Compact size but high pressure of 0.35 MPa
Seal-less construction
Thanks to magnet drive seal-less construction, no liquid leaks and no shaft seal replacement is required.
High pressure/high vacuum
Small size but high pressure up to 0.35MPa is available. It can be used for negative pressure of suction side because it makes suction pressure up to 8.00kPa.
Non-metal construction
Wet ends are corrosion resistant materials such as PPS, PEEK, ceramic, carbon. It can handle various chemicals such as acid and alkaline solutions because no metal is used.
Compact design
Ideal for incorporation in equipment and apparatus because it is small size and compact design.
Specification
|
Max. discharge capacity |
17/20 L/min |
|
Max. discharge pressure |
0.35 MPa |
|
Main materials |
GFRPPS, CFRPPS, CFRPEEK |
|
Suction, discharge bore |
R1/2 or 1/2NPT |
|
Max. vacuum |
8.00 to 9.33 kPa (abs) |
|
Liquid temp. range |
–20 to 95 C deg. (depending on liquid) |
|
Sealing method |
Seal-less construction |
